Key takeaways
- Bestway SaluSpa Type VI filter cartridge 2 pack with 4.2 by 3.1 inch size, model 60311E, for SaluSpa, Coleman SaluSpa and Lay-Z-Spa inflatable hot tubs.
An inflatable hot tub stays pleasant only as long as its water stays clean, and that job falls largely on a small cartridge that many owners forget until the water tells them about it. The filter traps debris every time the pump runs, so a worn or clogged cartridge quietly undermines the whole setup, from water clarity to how hard the pump has to work.
The Bestway SaluSpa Type VI Replacement Filter Cartridge comes in a 2 pack under model number 60311E, sized for SaluSpa inflatable hot tubs that use the Type VI housing. This review explains what the sizing and compatibility details mean, who should keep a spare pack on hand, and when a different cartridge type is the right answer instead.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
This 2 pack suits owners of SaluSpa, Coleman SaluSpa, and Lay-Z-Spa inflatable hot tubs that take a Type VI cartridge. Each cartridge measures 4.2 by 4.2 by 3.1 inches, and the pack carries Bestway model 60311E. Buy it as a matched replacement and spare set, after confirming the tub uses Type VI, since other filter types will not fit the same housing.
Key specs
| Spec | Detail |
|---|---|
| Brand | Bestway |
| Model / MPN | 60311E |
| UPC | 821808603114 |
| Pack count | 2 cartridges |
| Filter type | Type VI |
| Dimensions | 4.2 inches L x 4.2 inches W x 3.1 inches H |
| Item weight | 0.17 kg |
| Material | Plastic |
| Compatibility | SaluSpa / Coleman SaluSpa / Lay-Z-Spa Type VI housings |
Who it’s for
Owners of SaluSpa inflatable hot tubs are the direct audience. If the tub uses a Type VI cartridge, this 2 pack provides the matched replacement in the correct 4.2 by 4.2 by 3.1 inch size, with Bestway model 60311E confirming the part identity. Using the cartridge type the housing was built for avoids the guesswork of trimming, forcing, or adapting a near match that seals poorly.
Coleman SaluSpa and Lay-Z-Spa owners benefit from the same compatibility, since retailer listings place this cartridge in those Type VI housings as well. Brand naming across regions and retail channels can make spa parts confusing, so a cartridge identified by type, model number, and dimensions gives owners of any of these badges a common reference point to order against.
Anyone who keeps spares also fits. A 2 pack means one cartridge can be installed while the other waits dry and ready, which shortens the gap between noticing cloudy water or reduced flow and fixing it. For a tub used on weekends or by guests, that readiness matters more than the modest shelf space a small spare cartridge occupies beside the chemicals and test supplies.
Who should skip
Skip this pack if the tub takes a different filter type. Inflatable spas use several cartridge sizes, and Type VI is one specific fit. Owners whose manual or old cartridge shows a different type should match that type instead, because a cartridge that does not seat correctly in the housing cannot filter as intended, however close its dimensions may look at a glance.
Also skip it if the spa is a permanent, plumbed installation. This cartridge is made for inflatable hot tubs in the SaluSpa family, not for the larger filter systems of built-in spas and pools, which use different housings, media, and service routines. Those systems need their own specified cartridges or filter elements, sourced against the equipment model.
Finally, skip it as a first purchase before confirming the housing. New owners who have not yet checked which cartridge their tub shipped with should pull the existing cartridge and compare its type and measurements first. Ordering by the tub name alone invites a mismatch, since model lines can change fittings across versions and regions.
How it compares to alternatives
Compared with single cartridge purchases, a 2 pack changes the maintenance rhythm rather than the filtration itself. A single cartridge solves the immediate replacement, but leaves no spare when the installed one needs changing again. Two cartridges allow a rotation habit: swap in the fresh one, clean and dry the removed one if it remains serviceable, and always know a replacement is already in the cupboard.
Compared with generic cartridges listing the same Type VI fit, the Bestway-branded pack offers a clearer identity trail. Model 60311E, the UPC, and the stated dimensions give three ways to verify the match before ordering and after delivery. Generic options may fit the same housing, but the buyer carries more of the checking burden, comparing measurements and housing notes without a manufacturer part number behind them.
Compared with reusable filter balls or alternative media, a cartridge keeps the system as designed. Alternative media change how the housing is filled and cleaned, and they suit owners who enjoy adjusting their setup. A standard Type VI cartridge simply replaces the original element in kind, which suits owners who want the maintenance task finished quickly and the tub running as its manual describes.
FAQ
Which hot tubs does this cartridge fit?
It is made for SaluSpa inflatable hot tubs using a Type VI housing, and retailer listings also place it in Coleman SaluSpa and Lay-Z-Spa Type VI housings. Confirm the type from the old cartridge or the tub manual before ordering, since other filter types use different sizes and will not seat the same way.
How many cartridges are in the pack?
The pack contains two cartridges. That allows one to be fitted while the second is kept as a spare, or supports a rotation where a removed cartridge is cleaned and dried while the fresh one runs. Each cartridge in the pack measures 4.2 by 4.2 by 3.1 inches.
What is the model number for this cartridge?
The Bestway model and manufacturer part number is 60311E, with UPC 821808603114. Matching those identifiers, along with the Type VI designation and the dimensions, is the most reliable way to confirm that a delivered pack is the intended replacement for a SaluSpa housing.
What is the cartridge made from?
The material is listed as plastic, in a cartridge format built for the Type VI filter housing. As with any spa cartridge, its service life depends on use, water care, and cleaning routine, so owners should follow the tub manual guidance on inspection and replacement timing.
Final verdict
The Bestway SaluSpa Type VI Filter Cartridge 2 Pack is a maintenance staple rather than an upgrade, and it succeeds by being exactly the right part: Type VI, model 60311E, correctly sized, and doubled so a spare is always ready. Owners of SaluSpa, Coleman SaluSpa, or Lay-Z-Spa inflatable tubs with Type VI housings will find it the straightforward replacement choice. Owners with a different filter type, or a permanent spa system, should match their own specification instead, because correct fit is the whole value of a cartridge.
FAQ
Which hot tubs does this cartridge fit?
How many cartridges are in the pack?
What is the model number for this cartridge?
What is the cartridge made from?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.