Key takeaways
- Five fire pit covers compared by size, fabric, wind fastening, and vents, for round, square, and in-ground pits, so your fire pit stays dry all year.
A fire pit left uncovered through rain, snow, and sun soon shows it. Water pools in the bowl, ash turns to a damp paste, and metal parts start to rust while the finish fades. A good cover costs far less than a replacement fire pit.
The right cover starts with two measurements, the diameter of the pit and the height from the ground to the rim. This guide compares five covers in different sizes and shapes, from a compact 32 inch round cover to a wide 56 inch cover.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most round fire pits, the Cover Geny 36 inch cover is the choice, with 600D fabric and a fit for pits from 30 to 35 inches across. Small patios suit the Unicook 32 inch cover, while the NEVERLAND 36 inch cover adds vents and reflective strips. Large pits need the SHINESTAR 44 inch cover, and in-ground stone pits need the CATOTEL 56 inch cover.
Cover Geny Round Fire Pit Cover, 36 Inch
The Cover Geny round cover is the straightforward pick for the most common backyard fire pit size. At 36 inches across and 20 inches high, the listing states it fits wood-burning fire pits from 30 to 35 inches in diameter, covering the standard round bowls and fire tables on most patios.
The fabric is 600D heavy-duty material with a waterproof finish, the weight most outdoor covers use to resist tearing through wet seasons. The listing offers four sizes, from 22 inches up to 50 inches, so shoppers with an unusual pit can stay with the same cover style in a different size, though each size is a separate listing.
One point needs care. The model number is simply the size string, 36 inch diameter by 20 inch high, so the size itself is the identifier. Confirm the 36 inch size and the ASIN together when ordering, because the smaller and larger sizes look identical in photos.
Specs
| Feature | Detail |
|---|---|
| ASIN | B0CD6WK1QG |
| Fabric | 600D heavy-duty, waterproof |
| Fits | Round pits, 30 to 35 inch diameter |
| Size | 36 inch diameter x 20 inch high |
| Model number | 36 inch diameter x 20 inch high |
Unicook Round Fire Pit Cover, 32 Inch
The Unicook 32 inch cover suits small patios and compact fire bowls, where a full-size cover would hang loose and catch the wind. At 32 inches across and 14 inches high, the listing states it fits round fire pits and fire tables up to 30 inches in diameter.
The listing describes heavy-duty waterproof material with fade and UV resistant treatment, which matters for a cover that spends all summer in direct sun. The low 14 inch height is the trade-off: it keeps the cover snug on short bowls, but it will not reach the ground on a tall fire table. The model number is B65-032, worth confirming, because Unicook sells similar covers in many sizes.
This is the budget pick of the guide, and its job is simple protection for a small pit rather than heavy-duty coverage for a large one. It works best where the pit is sheltered from the worst wind, for example on a covered patio or against a garden wall.
Specs
| Feature | Detail |
|---|---|
| ASIN | B08DRK8QTC |
| Fabric | Heavy-duty, waterproof, fade and UV resistant |
| Fits | Round fire pits and fire tables up to 30 inch diameter |
| Size | 32 inch diameter x 14 inch high |
| Model number | B65-032 |
NEVERLAND Round Fire Pit Cover, 36 Inch
The NEVERLAND 36 inch cover is the tallest round cover in this guide, at 24 inches high, so it suits deeper bowls and fire tables that the shorter covers leave partly exposed. It is 36 inches across, with a waterproof 600D Oxford cloth body and a PVC layer.
Two details set it apart. Reflective strips run around the cover, which helps you spot the pit in the dark. Air vents are built in, and vents matter because a fully sealed cover can trap damp air inside, which leads to condensation and rust. The vents let moisture escape while the waterproof fabric keeps rain out.
One point needs care. The product information lists the model number as the words About 36inch, which is not a useful model code, so confirm the listing title and the ASIN together. The cover has been listed since late 2022, and the 24 inch height makes it the best fit here for taller bowls.
Specs
| Feature | Detail |
|---|---|
| ASIN | B0BFHWY3TK |
| Fabric | 600D Oxford cloth, PVC |
| Fits | Round fire pits, 36 inch diameter |
| Size | 36 inch diameter x 24 inch high |
| Features | Reflective strips, air vents |
SHINESTAR Round Fire Pit Cover, 44 Inch
The SHINESTAR 44 inch cover is the pick for large wood-burning fire pits, fire pit grills, and fire rings. At 44 inches across and 24 inches high, the listing states it fits fire pits from 40 to 44 inches in diameter.
The listing describes waterproof and windproof construction, and the 24 inch height gives full coverage on deep bowls and tall rings. SHINESTAR sells this cover in several sizes, including a 32 inch version for small pits, so confirm the 44 inch size and the ASIN together, because the smaller versions look the same in photos. The model number is 44 Dia x 24 H-Round.
One point needs care. The listing is sold by QY Direct, a third-party seller, rather than by Amazon itself, so check the seller and delivery details before ordering. The cover is round only, so a square fire table needs a different shape. For a large round pit, this is the only cover here that fits.
Specs
| Feature | Detail |
|---|---|
| ASIN | B086W21XDJ |
| Fabric | Waterproof, windproof |
| Fits | Fire pits, grills, rings, 40 to 44 inch diameter |
| Size | 44 inch diameter x 24 inch high |
| Model number | 44 Dia x 24 H-Round |
| Sold by | QY Direct |
CATOTEL Round Fire Pit Cover, 56 Inch
The CATOTEL 56 inch cover is a specialist pick, made for in-ground stone fire pits. At 56 inches across and only 8 inches high, the listing states it fits in-ground fire pits from 48 to 52 inches in diameter, sitting flat over a stone ring to keep leaves, dust, and rain out between uses.
The fabric is 420D Oxford with a waterproof finish, lighter than the 600D fabric on the other picks here. That is a fair trade, because an in-ground cover does not hang in the wind the way a tall cover does. The listing states it ships from Amazon and is sold by ChFeng-US, and the cover is a simple flat disc with no tall sides to catch gusts.
At 8 inches high, this cover will not fit a raised fire table or a portable bowl, and the 56 inch diameter will swamp a standard 36 inch pit. It is only the right choice when the pit is built into the ground and the ring measures between 48 and 52 inches across, so measure the stone ring, not the fire area inside it.
Specs
| Feature | Detail |
|---|---|
| ASIN | B0DM1KV5QM |
| Fabric | 420D Oxford, waterproof |
| Fits | In-ground pits, 48 to 52 inch diameter |
| Size | 56 inch diameter x 8 inch high |
| Sold by | ChFeng-US |
How to Choose
Start with the tape measure, not the brand. Measure the diameter across the widest point of the pit, then measure the height from the ground to the top edge. Add an inch or two to the diameter so the cover drops on easily, but do not oversize by much, because a loose cover flaps in wind and wears faster.
Match the shape exactly. Round covers do not fit square fire tables, and square covers do not fit round bowls. Rectangular fire tables need a rectangular cover, and in-ground stone pits need a low, wide cover like the CATOTEL pick here.
Fabric weight, stated in denier, is the simplest quality signal. Covers in 600D polyester or Oxford cloth are the standard for year-round outdoor use, with a waterproof coating or a PVC layer underneath, while lighter 420D fabric suits sheltered spots and low, flat covers. Look for sealed or taped seams, because stitching alone lets water through at the needle holes, and for air vents, which let trapped moisture escape. A drawstring hem, elastic cord, or buckle straps hold the cover down in wind.
Finally, let the pit cool completely before covering it. No fabric cover is a heat shield, and covering a warm pit can scorch the fabric and trap heat against the metal.
Who Should Skip It
Skip a fitted cover if the pit is lit every evening and you would rather brush it out after each fire than fit and remove a cover every time. A cover saves the most effort when the pit sits unused for days or weeks.
Skip the tall round covers here if the pit is square or rectangular, and skip the wide in-ground cover if the pit is raised on legs. A wrong-shape cover is worse than no cover, because it traps water in the folds and leaves part of the pit exposed. If the pit falls between two sizes, choose the larger one and cinch the drawstring tight.
Frequently Asked Questions
What size fire pit cover do I need?
Measure the diameter and the height, then choose a cover at least an inch wider than the pit and at least as tall. A cover that is too small will split at the seams, while one far too large will flap in wind and wear out faster.
Are fire pit covers waterproof or only water-resistant?
Most covers in this guide are described as waterproof, with a coated fabric and sealed seams, but protection depends on the fabric and the seams. A 600D cover with a PVC layer and taped seams keeps rain out far better than a thin cover with plain stitching. Even so, standing water can seep through over time, so tip the cover now and then to clear pooled rain.
Can I put a cover on a fire pit while it is still warm?
No. Wait until the pit and the ashes are completely cold to the touch before fitting any fabric cover. Covering a warm pit can scorch the fabric and trap heat against the metal. Clear out loose ash first, then fit the cover loosely so air can move underneath it.
How do I stop a fire pit cover blowing away?
Choose a cover with a drawstring hem, elastic cord, or buckle straps, and fasten it snugly around the base of the pit. Covers with clips that attach to the table legs hold best on fire tables. In very exposed yards, weigh the cover down and check the fastenings after high winds.
Final Verdict
A fire pit cover is a small purchase that protects a much larger one, and size and shape decide it. Measure the pit, match the shape, and pick a fabric weight that suits the weather where the pit sits. For most round pits, the Cover Geny 36 inch cover is the simplest fit, the Unicook 32 inch cover suits small patios, and the NEVERLAND 36 inch cover adds height and vents for deeper bowls. Large round pits need the SHINESTAR 44 inch cover, and in-ground stone pits need the CATOTEL 56 inch cover. Fit the cover only when the pit is cold, and fasten it snugly.
FAQ
What size fire pit cover do I need?
Are fire pit covers waterproof or only water-resistant?
Can I put a cover on a fire pit while it is still warm?
How do I stop a fire pit cover blowing away?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.