Updated Nov 22, 2026· 10 min read

Key takeaways

  • Gate hinges carry wood, metal, and farm gates on straps, barrels, or self-closing springs. Compare hinge forms, sizes, steel builds, and load wording.

As an Amazon Associate we earn from qualifying purchases.

A gate hinge has one plain job: carry the full weight of the gate at the post, swing after swing, in all weather. The five sets below cover the main forms you will meet for outdoor gates. Strap hinges spread their hold along the face of a wooden gate. Barrel hinges weld onto metal frames and turn on bearings. Wall mount pin hinges hang farm and fence gates from a flat post or wall face. Weld-on flag hinges suit smaller metal gates and fabrication work. Self-closing spring hinges pull the gate shut behind you, which matters for pool and yard gates that must never stand open.

Our top pick: HILLMASTER 6 Inch T-Strap Heavy Duty Gate Hinges, 2 Pack. Runner-up: Letowe Heavy Duty Gate Hinges 7 Inches, Barrel Style, 2 Pack.

Each entry below follows the wording of its own Amazon listing: the form, the size as printed, the build, the load figure as printed where the listing gives one, and what fasteners come in the box. Where a listing prints no load figure, or where two fields on the same listing disagree, that is stated openly rather than filled in from anywhere else.

Disclosure: This article may contain affiliate links. If you buy through these links, we may earn a small commission from Amazon.

HILLMASTER 6 Inch T-Strap Heavy Duty Gate Hinges, 2 Pack

View on Amazon

The HILLMASTER set is the classic tee strap form: a long strap leaf that screws across the face of the gate and a short leaf that fixes to the post, so the pull of the gate spreads along the wood instead of loading one corner. The listing prints a steel build with a black finish and a thickness of 2 mm, and gives an overall size of 6 x 4-1/2 x 2 inches with a hole diameter of 0.727 inches. The swing range is printed as 0 to 270 degrees, so the gate can fold back flat against the fence line.

The load figure printed in the listing specification block is 45 lbs, which places this pair on light to medium wooden gates: shed doors, barn doors, yard gates, and wooden fence gates of modest width. The box holds 2 hinges and 16 screws of 1 inch, so a single gate with two hinges is covered out of the pack. One wording note: the product table lists the material as steel, while the specification block on the same listing words it as steel iron. Either way, the 45 lb figure is the number to plan around.

Specs

  • Form: T-strap (tee) hinge, screw fixing
  • Size: 6 in strap; 6 x 4-1/2 x 2 in overall as printed
  • Build: steel, 2 mm thick, black finish
  • Load wording: 45 lbs capacity as printed in the listing
  • Swing: 0 to 270 degrees as printed
  • In the box: 2 hinges and 16 screws, 1 in long

Letowe Heavy Duty Gate Hinges 7 Inches, Barrel Style, 2 Pack

View on Amazon

At the heavy end of this guide sits the Letowe barrel hinge, a weld-on form built for metal swing gates, trailer ramps, and driveway gates. The barrel turns on internal ball bearings, and a grease fitting nipple lets you keep those bearings lubricated so the swing stays smooth under load. Extra thick back plates give the weld a broad footing on the frame and post. The product information prints a maximum weight capacity of 900 pounds for this 7 inch size; the same listing words its 5 inch size at 450 pounds, so the figure belongs to the size you pick, not to the range as a whole.

Two fields on this listing disagree, and both are worth knowing before you order. The product information lists the material as cast iron and iron, while the description text words the build as solid steel. The mounting field also prints surface mount, while the title and description both describe a weld-on fitting. Treat it as a weld-on hinge, since no screws or bolts are named in the package contents, and check the page if the exact metal matters for your weld plan. The finish is worded as a matte black coating.

Specs

  • Form: barrel hinge, weld-on fitting
  • Size: 7 in (a 5 in size is also listed)
  • Load wording: 900 lbs maximum capacity as printed for the 7 in size
  • Build: cast iron and iron per the product information field; matte black coating
  • Movement: ball bearings with a grease fitting nipple
  • In the box: 2 hinges; no screws or bolts named in the listing

Rasugarlary Steel Wall Mount Gate Hinges, 2 Pack

View on Amazon

The Rasugarlary pair takes the wall mount pin form used on farm gates: a steel bracket that fixes to a flat vertical surface at the head or tail of a fence run, shaped to fit a 5/8 inch hinge pin. The listing prints a steel build, a wall mount type, dimensions of 3.94 x 1.57 inches, and a hole count of 2. The description says two screw types come in the box, one for wall fixing and one for wood, and names wooden and concrete posts and walls as fitting surfaces, indoors or out.

This is the one pick here whose listing prints no load capacity figure at all, so there is no maker number to plan around. The pair suits fence and farm gates where the pin fit and the mounting face decide. One more field conflict to note: the color field prints black, while the finish field on the same listing prints unfinished. The description words the steel as weather resistant with extra welding at the joints.

Specs

  • Form: wall mount post hinge, fits a 5/8 in hinge pin
  • Size: 3.94 x 1.57 in as printed
  • Build: steel
  • Mounting: wall mount, 2 holes per hinge as printed
  • Load wording: no capacity figure printed in the listing
  • In the box: 2 hinges and screws, two types for wall or wood per the description

Metal Hinges Manufacturing 3.2 Inch Weld-On Gate Hinges, Pack of 2

View on Amazon

This compact flag hinge from Metal Hinges Manufacturing is the fabricator pick of the five. Each hinge is 3.2 inches (80 mm) long and cut from 5 mm carbon steel, and the pair is worded at 440 lbs (200 kg) per pair in the listing. The loose pin is detachable, which helps twice over: you can separate the leaves to align and tack weld each side in turn, and the gate can be lifted off its pins later without cutting or grinding. The included components are named simply as flag hinges and pin, and the set weighs 760 grams.

The finish wording splits two ways on this listing as well. The product information field prints a brushed finish type, while the maker specification block words a protective oil coating over the steel, which is the wording that fits a weld-on part you would paint or coat after fitting. No screws or bolts are named, because none are used: both leaves weld on. Gates, trailers, and machinery panels are the named uses, and the small footprint suits narrow metal frames where a 7 inch barrel would be too much hardware.

Specs

  • Form: weld-on flag hinge with detachable loose pin
  • Size: 3.2 in (80 mm), 5 mm thick
  • Build: carbon steel
  • Load wording: 440 lbs (200 kg) per pair as printed
  • Finish: brushed per the product information field; protective oil coating per the maker text
  • In the box: 2 hinges and pins; no screws named

SANKINS Self-Closing Gate Hinges, 2 Pack

View on Amazon

The SANKINS pair is the self-closing entry: a spring inside each hinge pulls the gate shut, and the tension is set with the swing adjuster tool that comes in the box, so you can tune how firmly the gate closes. The title words the swing as 90 degree adjustable, and the listing text gives an adjustable gap of 0.23 to 1.25 inches between the gate post and the frame, which helps when a post is not perfectly square. The build is steel with a powder coated black finish, and the product information prints a hole count of 7 and a set weight of 3.43 pounds.

The fences named for this set are wooden, vinyl, and PVC, and the title names installation screws in the box. The listing text adds one catch for timber work: the included screws are the self-tapping metal type, and wood screws are not included, so a wooden fence needs its own screws. The product information prints no load capacity figure for this set, so there is no maker figure to match against a heavy gate; this pair is about closing action on yard, garden, and pool gates rather than about carrying the heaviest leaf.

Specs

  • Form: self-closing spring hinge, 90 degree adjustable
  • Build: steel with a powder coated black finish
  • Fit wording: post-to-frame gap adjusts from 0.23 to 1.25 in per the listing
  • Load wording: no capacity figure printed in the product information
  • Weight: 3.43 lbs for the set as printed
  • In the box: 2 hinges, installation screws, and a swing adjuster tool

How to Choose

Begin with the gate itself, because the gate decides the form. A wooden gate wants a screw-fixed hinge, and a strap or tee form spreads the load along the gate face, which is why the HILLMASTER pair suits sheds, barns, and fence gates. A metal gate opens the weld-on forms: the Letowe barrel for wide, heavy driveway and trailer work, and the compact Metal Hinges Manufacturing flag hinge for narrower frames and fabrication jobs. Where a gate hangs from a post or wall face on a pin, the Rasugarlary wall mount pair is the matching form, provided your pin measures 5/8 inch. Where the gate must shut on its own, the SANKINS spring pair is the only form here that closes the gate for you.

Read the load wording exactly as each listing prints it. Figures in this guide run from 45 lbs on the HILLMASTER strap pair to 900 lbs on the 7 inch Letowe barrel, and the basis differs: the flag hinge figure is worded per pair, and the Letowe figure belongs to the 7 inch size only. Two listings here print no load figure at all, and that absence is information too. With no maker figure, keep the gate light, or pick a set whose listing states a number you can plan around.

Then check size and fasteners. Strap length should reach well across the gate face; a 6 inch strap on a wide, heavy gate is working at a disadvantage a longer strap would not face. Count what the box holds before you plan the fitting day: the HILLMASTER box includes its screws, the Rasugarlary box includes two screw types for wall or wood, and the SANKINS box includes self-tapping metal screws but not wood screws. Both weld-on sets need welding gear and name no fasteners at all. Finish is the last check: black finishes and powder coating are worded for outdoor use, while the oil coating on the flag hinges is a workshop finish you would cover after welding.

FAQ

How many hinges does one gate need?

Every set in this guide is sold as a pair or pack of two, and two hinges carry a typical yard, shed, or fence gate. A tall or heavy gate can take a third hinge at mid height, so match the pack count to the gate.

What hinge form suits a metal driveway gate?

A weld-on barrel hinge is the form worded for that work. The Letowe 7 inch pair prints a 900 lb maximum capacity, turns on ball bearings with a grease fitting, and welds to the frame and post, which suits wide metal driveway gates and trailer ramps.

Do these hinge sets include screws?

Some do and some do not. The HILLMASTER box holds 16 screws, the Rasugarlary box holds two screw types for wall or wood, and the SANKINS box holds self-tapping metal screws with wood screws not included. Both weld-on sets name no screws, since the leaves weld in place.

How do I match a hinge to my gate weight?

Weigh or estimate the gate, then compare that figure with the load wording printed in the listing, keeping the basis in mind: per pair on the flag hinges, per the 7 inch size on the barrel hinges. If a listing prints no load figure, treat the set as a light gate pick.

Conclusion

Match the form to the gate and the rest follows. Strap hinges carry wooden gates on screws, barrel and flag hinges weld onto metal frames, the wall mount pair hangs a farm gate from its post face, and the SANKINS spring pair keeps a yard gate closing on its own. Read each listing load figure on its own basis, confirm the fasteners in the box before fitting day, and the hinge will do its plain job for years.

L
Linda Harper
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Gate Hinges for Wood, Metal and Farm…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.