Key takeaways
- Carpenter bee traps hang on decks, fences, and eaves to catch boring bees near wooden homes and barns. Compare trap sizes, jars, and mounting options.
As an Amazon Associate we earn from qualifying purchases.
Carpenter bees do their damage quietly. A female bee bores a round entry hole into a deck rail, a fence board, an eave, or a barn beam, then tunnels along the grain to build a nesting gallery inside the wood. One hole looks harmless, but season after season of tunneling softens boards, invites moisture, and draws woodpeckers that tear the surface open looking for the larvae inside. By the time the sawdust piles and staining show up, the bees have usually been working the same boards for years.
A wooden carpenter bee trap works with that nesting behavior instead of against it. The trap is a block of wood with angled entry holes drilled into it, sized and shaped to look like the start of a nesting tunnel. A bee that enters follows the passage downward toward the light coming from a clear jar or receptacle below, drops in, and cannot find the dark exit hole again. There are no sprays, powders, or baits required for the basic design, and the trap hangs passively wherever bee activity shows up.
The five traps below all follow this wooden block and collection jar pattern, but they differ in wood type, jar size, pack count, and how you empty them. One is the original patented design in unfinished pine, one is a compact handmade mason jar trap, two bring cedar construction in single and two trap packs, and one adds an internal vault and a pull string release door for emptying from the ground.
Disclosure: This article may contain affiliate links. If you buy through these links, we may earn a small commission from Amazon.
Original B Brothers Carpenter Bee Trap
This is the original patented carpenter bee trap, designed by Brian and Bradley Blazer after dealing with carpenter bee damage around their own house and wood structures. The housing is yellow pine, and the listing explains that the unfinished wood naturally attracts the bees, so the surface should never be painted or stained. Angled holes in the block guide entering bees down into the glass jar mounted underneath, where they move toward the light and stay caught.
The kit is built for simple hanging. The mounting hardware ships stored inside the glass jar itself, and the set includes screw hooks and a hanging chain, so the trap can go up on siding, a deck post, a barn wall, a pergola, a shed, or exposed lumber without extra parts. At 8 x 5 x 8 inches and 3 pounds, it is the largest of the classic jar traps in this group, and the listing notes it is made in the USA and built for season after season of outdoor use.
Specs
- Housing material: yellow pine wood, unfinished
- Collection jar: glass jar mounted under the block
- Dimensions: 8 x 5 x 8 inches
- Weight: 3 pounds
- Included hardware: screw hooks and hanging chain, stored inside the jar
- Power: none, not electric
Billy Bob Carpenter Bee Trap
The Billy Bob trap follows the old fashioned mason jar pattern: a solid wood top with pre-drilled entry holes sits over a large capacity glass jar. The listing describes the process plainly, with bees climbing into the holes in the wood top and down into the jar, where they cannot get back out. It also notes that once one bee is caught, more bees tend to be drawn toward the trap, which matches how territorial these bees are around an active nesting spot.
Each trap is handmade in the USA, and the natural wood top is meant to emulate the wooden environment the bees already seek out. The footprint is compact at 3.5 x 3.5 inches, with the jar bringing the total height to 10 inches, and the whole unit weighs 1.3 pounds. That slim profile suits narrow spots such as a single fence post, a porch column, or one section of eave where a wider block would look out of place. To empty it, the mason jar unscrews from the wood top.
Specs
- Materials: glass and wood
- Dimensions: 3.5 x 3.5 x 10 inches
- Weight: 1.3 pounds
- Model number: 34089
- Style: old fashioned mason jar design with solid wood top
- Origin: handmade in the USA
J and B Enterprises Wood Carpenter Bee Trap, 2 Pack
This listing covers two traps in one pack, which suits properties where bees work more than one structure at once, such as a deck at the back of the house and a fence line or outbuilding at the front. The traps are built from cedar wood in a rustic Amish made style, and the listing states that the design mimics the natural nest of a carpenter bee. It also says the traps come pre-baited with the natural scent of the rot resistant red cedar itself, so there is nothing extra to apply before hanging them.
Cedar brings a practical advantage for a trap that lives outdoors all season: the wood is naturally resistant to rot, so the block holds up through rain and sun without a finish coat. The listing suggests the traps for home siding, outbuildings, porches, and decks, and notes that the natural cedar look blends into outdoor spaces rather than standing out against them. The manufacturer is J and B Enterprises llc, and the model number is BT-GL2421.
Specs
- Pack count: 2 traps
- Material: cedar wood
- Model number: BT-GL2421
- Manufacturer: J and B Enterprises llc
- Placement per listing: siding, outbuildings, porches, and decks
GRTRE Wood Carpenter Bee Trap, Chalet Style
The GRTRE trap takes the same wood block and jar idea and shapes it like a small chalet, with a pitched roof profile that sheds rain and looks at home hanging from an eave or a garden fence. It is built from cedar wood, so it shares the natural rot resistance of the other cedar trap in this group, and it is a single trap pack aimed at one active spot rather than a whole property.
At 0.91 kilograms it is a midweight unit, heavy enough to hang steady in a breeze without swinging against the siding. The listing keeps the target narrow: the stated target species is the carpenter bee, and the design is a hanging outdoor trap for the places these bees already bore, such as deck rails, fence boards, and wooden trim. The model number printed in the listing is carpenter bee trap 04-1.
Specs
- Material: cedar wood
- Style: chalet style hanging trap
- Weight: 0.91 kilograms
- Model number: carpenter bee trap 04-1
- Pack count: 1 trap
- Target species: carpenter bee
Best Bee Brothers Ultimate Pro Carpenter Bee Trap, 2 Pack
The Ultimate Pro is the most elaborate design here. Inside the wood body, an internal Bee Vault holds caught bees, and an extra-large clear external receptacle adds capacity while letting you see the catch level at a glance. The listing explains that aeration holes release the pheromones and sounds of the bees held inside, which the maker uses as part of the draw for other bees nearby, and it describes a 15 ft radius for each trap. The body is wood, topped with a roof made from lightweight ocean-reclaimed plastic.
Emptying is where this design departs from the screw-off jar pattern. A spring-loaded release door opens by way of a 9 ft pull string and hook, so the catch can be dropped without taking the trap down or handling the receptacle, and the listing adds that the vault can also be emptied with a standard vacuum hose. Each trap measures 4.2 x 5.8 x 7.5 inches, and the pack includes 2 traps, enough to cover both ends of a long deck or two separate problem areas at once.
Specs
- Dimensions: 4.2 x 5.8 x 7.5 inches per trap
- Pack count: 2 traps
- Collection: internal Bee Vault plus extra-large clear external receptacle
- Emptying: spring-loaded release door with 9 ft pull string and hook
- Coverage: 15 ft radius per the listing
- Roof material: ocean-reclaimed plastic
How to Choose
Start with placement, because a well placed basic trap outperforms a fancy trap hung in the wrong spot. These traps work where carpenter bees are already active, so hang the trap within sight of existing bore holes, along the eave, fence rail, or deck beam the bees are using. Sunny faces of a structure draw the most scouting activity in spring, and the listings for these traps consistently point to siding, decks, barns, pergolas, and sheds as the right mounting zones.
Next, match pack count and coverage to the property. A single trap suits one known hot spot, such as a porch beam or a short fence run. Bees working two or three structures call for a 2 pack, or for traps with a wider stated radius like the Ultimate Pro and its 15 ft figure. Splitting two traps between two active faces of a building almost always beats doubling up in one corner.
Then consider the wood and the emptying routine. Cedar traps resist rot without any finish, while the unfinished pine of the Original B Brothers is left bare on purpose, because the listing says paint or stain would work against the natural draw of the wood. For emptying, classic mason jar designs unscrew by hand, which is easy at fence height, while a pull string release door earns its keep on traps hung high under second story eaves, where nobody wants to climb a ladder holding a full jar.
Finally, set traps out early. Carpenter bees emerge and scout for nesting sites in spring, and a trap already hanging when scouting begins intercepts bees before new galleries are drilled. Leave the traps up through the active season, empty them as the jars fill, and once activity ends, plug old bore holes in the wood so returning bees are pushed toward the traps instead of the old tunnels.
FAQ
Where should I hang a carpenter bee trap?
Hang it close to where the bees already are: near existing bore holes, along eaves, fence rails, deck beams, barn walls, or shed siding. The listings for these traps point to wooden structures with current activity rather than open yard space, and a sunny, sheltered face of the building is the typical scouting zone. Height matters less than proximity to the holes the bees are using.
How does a wooden carpenter bee trap work?
The angled holes drilled into the wood block look and feel like the start of a nesting tunnel, so an exploring bee enters on its own. The passage leads downward, and the bee follows the light coming from the clear jar or receptacle below and drops in. From inside the jar, the bee cannot locate the dark entry passage again, so it stays caught without any spray, powder, or power source.
Do these traps need bait or chemicals?
The basic designs do not. The jar traps here work through tunnel shape and light alone, the cedar traps are described as pre-baited with the natural scent of the cedar itself, and the Ultimate Pro listing describes using the scent and sound of already caught bees as the draw. No chemical treatment is part of any of these five listings.
How do I empty a carpenter bee trap?
On the classic mason jar models, unscrew the glass jar from the wood block, empty it, and screw it back on. The Ultimate Pro uses a spring-loaded release door worked by its 9 ft pull string, so the catch drops out while the trap stays hanging, and its listing also describes emptying the vault with a standard vacuum hose. Check the jar or receptacle regularly during peak spring activity so it never fills to the entry passage.
Conclusion
For a single active spot, the classic jar traps are the straightforward answer: the Original B Brothers brings the original patented design in unfinished yellow pine with its hardware packed in the jar, and the Billy Bob offers a slimmer handmade profile for tight posts and columns. Cedar builds, in the J and B Enterprises 2 pack and the single GRTRE chalet, add natural rot resistance and a look that blends into fences and garden structures. Where bees are numerous or traps must hang high, the Best Bee Brothers Ultimate Pro earns its place with the internal vault, the clear external receptacle, and pull string emptying from the ground. Whichever design fits your buildings, hang it early in spring, close to the holes the bees already use, and let the tunnels do the work.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




